When installing a DirecTV satellite dish it is important to first have all the major parts necessary to install it and connect it to the TV set. These parts include the DirecTV satellite dish, any hardware necessary to install the dish, special cable, telephone line cable, DirecTV satellite dish receiver, and a TV set.
The DirecTV satellite dish is what makes it possible to receive satellite signals from space and send these signals to a TV set. The satellite dish is what will be installed outside on the roof, balcony, exterior wall, or from a terrestrial location such as a pole on the ground.
The satellite dish is round and is approximately 20 inches wide and 18 inches tall. It is important to note that besides this size dish, there is another size dish available if the DirecTV World Direct Service package is ordered. This dish is 36 inches wide, 18 inches high, and round. The satellite dish must point in a certain direction in order to pick up the satellite broadcast. It must be in the line of sight of the Southern sky and trees, poles, or buildings should not block this sight line.
This is a requirement to receive DirecTV satellite signals. LNB Low Noise Block tester is essential in finding clear, strong signals from a satellite TV service in order to maximize satellite dish installation.
The LNB tester is a great way to make sure that the best signal possible is received from the satellite orbiting over head. They are usually very affordable and connect between both the satellite dish and TV receiver. The hardware necessary to install the dish depends on the type of installation selected. For instance, having the satellite dish attached to the balcony will differ from installing it on the roof. Contact a home improvement center for the materials that should be used with the specific installation.
Once the satellite dish is installed either on the roof, balcony, or a pole from the ground, connect it to the receiver indoor. This is usually done with a cable. There are two different types of cables that are used depending on the set up. If there is only one receiver in the home, an RG-6 cable can be used. This cable can hold a certain amount of bandwidth. Since there is only one receiver, it is not necessary to send much data from the satellite dish to the receiver.
These receivers are used for advanced products and each receiver installed in a home can choose its own programming.
These cables can carry much higher bandwidth. In order for DirecTV to activate itself and work properly, it must be connected to a telephone line at all times. All receivers in the home must be connected to the same phone line. The DirecTV satellite dish receiver is needed in order to receive the signals from the satellite dish, unscramble them, and decompress them.
They are pretty much the heart and soul of the satellite TV set up. These receivers usually come in set top boxes. They are generally small boxes that fit on top of the TV set. Please log in with your username or email to continue. No account yet? Create an account. Edit this Article. We use cookies to make wikiHow great.
By using our site, you agree to our cookie policy. Cookie Settings. Learn why people trust wikiHow. Download Article Explore this Article methods. Things You'll Need. Related Articles. Author Info Last Updated: August 10, Method 1. The number to order their service is Have the receiver installed in a location with an unblocked view of the southern sky. Most satellite receivers are installed on a roof or balcony. If possible, trees and buildings should not block the receiver.
Method 2. You may need a software program such as Adobe Reader to view the file. Follow national and local guidelines for installing your dish. There may be requirements or codes that restrict the size of your satellite dish or how high you can mount it. Find an appropriate location for your satellite receiver. Look for a clear, southern-facing area with a high vantage spot.
Find coordinates for pointing your dish to get reception. Connect your satellite receiver to the TV as specified in the receiver's manual.
Connect both the television and satellite receiver to a power outlet. Turn them both on. If there is no switch, turn to UHF channel 14 or channel number 65 on cable. Navigate the menu using buttons on the receiver's front panel and the receiver's manual to find the correct azimuth horizontal and elevation vertical coordinates.
Determine and survey the dish's exact mounting site. Using the receiver's pointing coordinates, find the mounting site for your dish. Measure the number of feet meters of cable needed to finish the installation. Start assembling the satellite receiver dish. Bolt or screw in the satellite's plastic or metal reflector to its support arm.
This lets you preset the satellite to its correct elevation. Mount the mast, or pole, for the receiver. Multiple options exist for this step depending on where you install the dish roof, hollow wall, on brick or concrete, etc. Consult the self-installation guide to see instructions and the necessary tools for each option. Make sure the mast is level to get a satellite signal. Use a bubble level to help you determine it is even. Put the satellite receiver dish on its mast.
Attach the LNB to the receiver's support arm. Position a grounding block as closely as you can to the place where the dish's cable will run into the house. Run the receiver dish's cable to the grounding block.
0コメント